-40%
Graphite Gasket 3-1/2" Flask Perforated Flasks Vacuum Casting Gaskets for 3.5" D
$ 5.73
- Description
- Size Guide
Description
GRAPHITE GASKET FOR VACUUM CASTINGGASKET FOR 3-1/2" PERFORATED FLASKS
HIGH-HEAT GASKET -
VACUUM SEAL
Graphite Gasket for use in Vacuum Casting for sealing of the flange and the casting chamber.
This graphite gasket is suited for 3-1/2" casting flask, gasket is 1/16" thick material will withstand temperatures of up to 1200°F - 649°C.
Gasket are long lasting, can be used even when they wear down to almost paper thin.
Note: The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are VERY Fragile and subject to breakage.
Graphite gaskets can be used in combination, along with silicone gaskets for optimum vacuum seal and heat protection.
The graphite will prolong the life of the silicone gasket.
SPECIFICATIONS:
JETS Product # 0304-15235
-
Material:
High Temperature Graphite
-
Flask Diameter:
3-1/2" - 89mm
-
Gasket Outside Diameter:
5-7/32" - 132.4mm
-
Gasket Inside Diameter:
3-25/32"
- 96mm
-
Gasket Face Width:
23/32"
- 18.34mm
-
Thickness:
1/16" - 1.65mm
Item is new, - Item is packaged - sandwiched in between cardboard to ensure safe shipping. VERY FRAGILE!
Note:
The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are subject to breakage.
SHIPPING: Via USPS MAIL
Visit
JETSTOOLS
our ebay Store to see listings for many other Lost Wax Casting Supplies and Accessories, including Casting Investment Powder, Casting and Carving Wax along with a selection of many other
J
ewelers
E
quipment
T
ools and
S
upplies
JETSINC
.
E2 814 CKSP M