/24V Submersible Pump for Pumping Oil Water 38mm Water Oil N4L0

Description

Features:
Pump is made of stainless steel , hard to rust, which is materials, -corrosion and enduring.
Fixed filter is not removable when you use it. Dirty filter can be detached, easy to .
It can transfer oil, fuel water or and safely.
It is forbidden to pump gasoline, , acid and alkali and other , explosive and corrosive liquids.
It is suitable for harvester, large agricultural machinery, construction machinery, big wheel towing and other field operation refueling inconvenient means of transportation and equipment and machinery that cannot reach the station refueling.
The pump adopts /24V motor, put /24V plug in a car or a rather than plug it into a socket.
It is very easy to use and can reuse multiple times, economical and very practical.
The pump is designed for diesel and the bottom of the pump need to be completely submerged in the when it is used.
Specifications:
Material: Stainless steel
Drive Mode: electrodynamic
Voltage: , /24V (optional)
Current: 1.8A( ), 0.8A (24V)
Motor Racing Current: 0.2A (), 0.1A (24V)
Pump Running Current Largest: 1.5A (), 0.8A (24V)
: 40W
Rate: 12L/min
Outer Diameter: 38mm / 1.5in
Oil Out Diameter: 16mm / 0.6in
Pump Lift: 2m / 79in
Motor Racing Speed: 8500r/min
Wire Length: / 118in
Packing: Carton
Package Size: 16*8.5*5.2cm / 6.3*3.3*2in
Packege Weight: 327g / 11.5oz
Method Of Application:
1.Take a self-contain oil hose, and then the pump completely into the oil (or water) .
2.Put /24V plug in a car or a rather.
3.The red click is to connect positive pole, the black click is to connect negative pole.
4.The pump after use, should put the oil from the oil (or water out)
Notes:
1. pump operated by /24V motor, full device.
2.The motor is insulated to the .
3.When it works, first should put pump in the middle of bucket, does not allow empty load operation.
4.Pay attention to the load capacity of bucket when the pump is running,do not exceed load capacity line.
5.The pump is strictly prohibited pumping gasoline, and other liquids.
6.The oil hose is self-provided .
7.This product is mainly composed of , pumping, continuous work after 50 minutes, cooling oil pump before use.
8.Don't make change the anode and cathode of clamp.
9. The pump need to be completely submerged in the when it is used.
Package List: E8006-2
1 * Pump